A paving circle is a distinctive method to expand your garden’s patio area. It can be used to set up an outside eating area, show off a variety of potted plants, have fun, or have a lovely time with your loved ones. Whatever it may be, it creates a unique and attractive look to any space.

However, installing circular pavers around your space might require hard work by experienced hands or yourself. Either way, you must follow some important instructions and steps to lay a perfect paving circle. But before these instructions, have a look at the tools and materials you will need while laying the pavement.

Tools & Materials to Lay a Paving Circle

A list of materials and tools necessary for laying a circular pavement has been provided below. Make sure you are ready with all of them, so you won’t have to run at the last moment.

Paving Stones
Cement
Tape Measure
Rubber Paving Mallet
Pointing Trowel
Spirit Level
Sand
Compactor
Crush and Run/ Type 1 sub base
Spade
Wheelbarrow
Broom
Rake
Washed Sharp Sand
Protective wearables including gloves, footwear, and glasses

So, prepare all these tools and materials before laying a circular pavement. However, make sure you are using quality stones for your pavement. Otherwise, you might end up ruining your space.

Best Paving Circle Stones for Your Space

These are the best stones that can be laid to make a perfect circular pavement. These stones provide durability, robustness, and naturalness that any other stone does not. Apart from the circle, there are different paver patterns that you can use in your next patio design.

Sandstone Circle

To add a natural feel to your outdoor space, Sandstone Circles are the best paving stones. These add a contemporary yet traditional touch to any area. These paving circles are an ideal choice whether you are looking to pave your small outdoor space or large gardens. With various colours and sizes available, you can have an outdoor dream space of yours.

Limestone

Limestone circles will surely add a great character to your outdoor areas. It is recommended to prefer darker shades, including Midnight Black Limestone, Grey Limestone, etc.

Flagstone

You can create a unique garden or any outdoor space using high-quality Flagstones. With different shades, sizes, and patterns, you can show your creativity and lay a perfect circular pavement.

Granite

Granite circles can help create a stylish and modern pattern for your garden or outdoor space. Its durability, strength, and pleasing look will turn your garden into something unimaginable.

How to Lay Paving Circles?

Now you are all set to lay perfect circular paving for your garden or outdoor space. Make sure you follow all the below steps correctly. Otherwise, you might make a mess of your hard work.

Step 1 – Position Paving Circle Stones

Before doing all the digging and mixing work, position your stones where you want to lay them. This will ensure that you place them correctly and result in a perfect pattern. It is recommended that you leave a 10-20mm jointing gap between the stones.

Step 2 – Lay a Strong Foundation

A solid foundation is a must if you want to lay a perfect paving circle. Using a spade, dig the surface down to 150mm. Clear all the plants, remove topsoil, and level the ground. Make sure to have a fall of 1:80 for rainwater drainage.

Step 3 – Create a Strong Sub-base

Laying pavers need a strong and levelled sub-base. Fill hardcore with 100mm and set circular stones on a bed of mortar around 30mm to 40 mm thick, using 5 parts sharp sand to 1 part cement. Make sure the mixture is not too wet.

Step 4 – Laying Paving Circles

Now start laying paving circles. Start with the centre stone and gently lay all the pieces in a circular pattern. Don’t forget to have a fall of 1:80 for water drainage. Regularly check the levels with a spirit level to have a perfect paving pattern. Once you lay all the stones, leave them for around 24 hours to set.

Step 5 – Finishing

To get a fine and professional finish to your paving circles:

Fill the gaps between the stones.
Prepare a mixture of 3 parts building sand to 1 part cement.
Fill all the gaps with this mixture and remove excess immediately to have a clean look. Remember that the mixture needs to be damp, not wet.

However, you must know how to clean paving slabs properly to have a professional-like finish.

Conclusion

In five easy steps, you will lay the perfect paving circle you dreamt of. Make sure you discuss with the professionals first and then start laying the stones.

Frequently Asked Questions

These frequently asked questions will clear all your doubts and queries regarding paving circles.

Q1. How do you build a circle patio?

A detailed explanation of how to build a circle paving has already been discussed. You can check and follow the steps correctly.

Q2. What are the different types of paving slabs?

There are countless paving slabs available, including Sandstone, Limestone. Slate, Granite, Flagstone, etc. Make sure you are dealing in quality.

Q3. How many stones does it take to make a circle?

It depends on the area and pattern you will be using. Just ensure you are done with the calculation before laying paving slabs.

How to Lay A Paving Circle: Revamp Your Space in 5 Easy Steps